EIGENSCHAPPEN NEW!
Smart Car PC Power Supply - 160 watts output -
Ideal car Power supply for operating P4, P4-M,
Celeron, AMD systems - ATX, 6-24V wide input
range - Intelligent shutdown controller - ON/OFF
motherboard control - Survives vehicle engine
cranks - Battery deep discharge prevention - High
efficiency, 160 watts output - "Anti-Thump"
Amplifier remote control - 15A automotive fuse
(mini-blade) - VIA, P4 and AMD CPU support -
manufactured by mini-box.com - ROHS compliant
version (limited qty, EU customers first)
PRODUCTBESCHRIJVING Intelligent Automotive / Car
DC-DC ATX PC Power Supply M2-ATX is an
intelligent, high power, vehicle (car / boat /
electric cart) 12V DC-DC ATX PC power supply
designed for car pc and battery powered
applications. Designed to provide power and to
control the ON/OFF switch of a motherboard (car
PC) based on ignition status, M2-ATX is a wide
input (6 to 24V) vehicle / car / battery operated
ATX power supply capable of surviving tough car
engine cranks (down to 6V) as well as transient
over-voltage situations. Just connect it to your
car / boat / RV / solar battery and power up your
PC! The M2-ATX comes with complete cable harness
consisting of: - ATX cable extender plus HDD and
Floppy power (9inch) - Power input cable harness
terminated in 0.25' fastons (12inch) - 2 pin M/B
on/off power ON control wire harness (9inch) -
set of LBJ (little black jumpers) to control
various power sequencing schemes (Optional) -
P4-12V to P4-12V cable (optional accessory)
M2-ATX has 8 user selectable microcontroller
driven timing modes, allowing you to choose up to
8 ignition/shutdown car pc timing schemes via a
built-in shutdown controller. By removing all
user-selectable jumpers, M2-ATX becomes a
traditional PC PSU with no ignition control
(shudown controller bypassed) and it can be used
in non-vehicle computer applications. Even if
your computer is totally OFF, a PC will still
consume a few hundered milliwatts, needed to
monitor PC ON/OFF status. When the computer (car
pc) is in the suspend/sleep mode, it will consume
even more power, because the RAM needs to be
powered at all times. The power consumption in
the suspend mode is few watts. No matter how big
your car battery is, it will eventually drain
your vehicle / car battery in a matter of days.
While in deep sleep mode, M2-ATX constantly
monitors your car battery voltage levels,
preventing deep discharge situations by
automatically shutting down (using a built-in
shutdown controller) until battery levels reach
safe levels again. No more dead car batteries, no
more computer resets during engine cranks, along
with multiple timing schemes, small formfactor
and very competitive price makes the M2-ATX the
premier solution for dc-dc ATX vehicle / car PC
power supply solutions. M2-ATX is formfactor
compatible with VoomPC car PC enclosure and with
most Casetronics and Morex enclosures and it is
footprint compatible with the M1-ATX. The same
version of microcode will run on both M1-ATX and
M2-ATX. NOTE: M2-ATX provides up to 8A on the 12V
rail, making it ideal for operating most P4,
P4-M, Celeron, AMD systems. Low power Geode and
VIA processors (C3, C7) will work as well,
leaving ample power for 12V or 5V peripherials
(multiple 3.5" hard drives, CDROM, etc). Other
timing schemes / designs are possible.
EIGENSCHAPPEN
Smart Car PC Power Supply
- ATX, 6-24V wide input range
- Intelligent shutdown controller
- ON/OFF motherboard control
- Survives vehicle engine cranks
- Battery deep discharge prevention
- High efficiency, 90 watts output
- Works with car batteries
- "Anti-Thump" Amplifier remote control
- Automotive fuse (mini-blade)
- Works with all VIA mini_ITX M/B
- manufactured by mini-box.com
- ROHS compliant version
PRODUCTBESCHRIJVING
Intelligent Automotive / Car DC-DC ATX PC Power Supply
M1-ATX is an intelligent vehicle (car, boat, electric cart, etc) 12V DC-DC ATX PC power supply designed for car pc applications. Designed to provide power and to control the ON/OFF switch of a motherboard (car PC) based on ignition status, M1-ATX is a wide input (6-24V) vehicle or car DC-DC ATX power supply capable of surviving tough car engine cranks (down to 5.7V) as well as transient over-voltage situations.
The M1-ATX comes with complete cable harness consisting of:
- ATX cable extender plus HDD and Floppy power (9inch)
- Power input cable harness terminated in 0.25' fastons (12inch, AWG18)
- 2 pin M/B on/off power ON control wire harness (9inch)
- set of LBJ (little black jumpers) to control various power sequencing schemes
Just connect it to your car / boat / RV battery and power up your PC!
M1-ATX has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown vehicle / car pc timing schemes via a built-in shutdown controller. By removing all user-selectable jumpers, M1-ATX becomes a traditional PC PSU with no ignition control (shudown controller bypassed) and it can be used in non-vehicle computer applications.
Even if your computer is totally OFF, a PC will still consume a few hundered milliwatts, needed to monitor PC ON/OFF status. When the computer (car pc) is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts.
No matter how big your car battery is, it will eventually drain your vehicle / car battery in a matter of days.
While in deep sleep mode, M1-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down (using a buil-in shutdown controller) until battery levels reach safe levels again.
No more dead car batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M1-ATX the premier solution for dc-dc ATX vehicle / car PC power supply solutions.
M1-ATX is formfactor compatible with all Casetronics enclosures.
NOTE: Do not try this PSU with Pentium 4s, works with all VIA mini-ITX boards and some low power Pentiums and AMDs, please check your motherboards specs and make sure that the CPU is not getting V(core) from the 12V rail, must be from the 5v rail. Stay away from motherboards that have 4 pin 12VATX connectors, that that is a good indication that the M/B is using 12V for V(core).
Other timing schemes / designs are possible.
Smart Car PC Power Supply
- ATX, 6-24V wide input range
- Intelligent shutdown controller
- ON/OFF motherboard control
- Survives vehicle engine cranks
- Battery deep discharge prevention
- High efficiency, 90 watts output
- Works with car batteries
- "Anti-Thump" Amplifier remote control
- Automotive fuse (mini-blade)
- Works with all VIA mini_ITX M/B
- manufactured by mini-box.com
- ROHS compliant version
PRODUCTBESCHRIJVING
Intelligent Automotive / Car DC-DC ATX PC Power Supply
M1-ATX is an intelligent vehicle (car, boat, electric cart, etc) 12V DC-DC ATX PC power supply designed for car pc applications. Designed to provide power and to control the ON/OFF switch of a motherboard (car PC) based on ignition status, M1-ATX is a wide input (6-24V) vehicle or car DC-DC ATX power supply capable of surviving tough car engine cranks (down to 5.7V) as well as transient over-voltage situations.
The M1-ATX comes with complete cable harness consisting of:
- ATX cable extender plus HDD and Floppy power (9inch)
- Power input cable harness terminated in 0.25' fastons (12inch, AWG18)
- 2 pin M/B on/off power ON control wire harness (9inch)
- set of LBJ (little black jumpers) to control various power sequencing schemes
Just connect it to your car / boat / RV battery and power up your PC!
M1-ATX has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown vehicle / car pc timing schemes via a built-in shutdown controller. By removing all user-selectable jumpers, M1-ATX becomes a traditional PC PSU with no ignition control (shudown controller bypassed) and it can be used in non-vehicle computer applications.
Even if your computer is totally OFF, a PC will still consume a few hundered milliwatts, needed to monitor PC ON/OFF status. When the computer (car pc) is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts.
No matter how big your car battery is, it will eventually drain your vehicle / car battery in a matter of days.
While in deep sleep mode, M1-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down (using a buil-in shutdown controller) until battery levels reach safe levels again.
No more dead car batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M1-ATX the premier solution for dc-dc ATX vehicle / car PC power supply solutions.
M1-ATX is formfactor compatible with all Casetronics enclosures.
NOTE: Do not try this PSU with Pentium 4s, works with all VIA mini-ITX boards and some low power Pentiums and AMDs, please check your motherboards specs and make sure that the CPU is not getting V(core) from the 12V rail, must be from the 5v rail. Stay away from motherboards that have 4 pin 12VATX connectors, that that is a good indication that the M/B is using 12V for V(core).
Other timing schemes / designs are possible.
EIGENSCHAPPEN
Micro Power Supply
- 80 Watt DC-DC power supply unit (PSU)
- ATX standard compliant
- 11-30V operation
- 100% silent, small footprint
- Plugs directly into the motherboard ATX connector
PRODUCTBESCHRIJVING
NOT RECOMMENDED FOR NEW DESIGNS. THIS PRODUCT WILL BE EOL'd on Q1 2006.
REPLACEMENT OR EQUIVALENT PART: M1-ATX
Compact design, less cables. The PW-80 is the only cableless mini-atx wide input dc to dc power supply for the VIA platform. Compatible with an entire range of mini-itx motherboards such as VIA EPIA-M provides cool, silent power for your small mini-itx board from a single 11V-30V power source. Recommended for 12 and 14V battery applications.
Reduce space. Eliminate 20 unnecessary wires by connecting directly into the motherboard ATX connector. The PW80 11-30V dc-dc converter was designed from ground up to fit VIA's mini-itx form factor, allowing case designers to save space while not compromising power requirements.
Cool power. Operating from 11V-30V, the PW-80 dc-dc quiet power supply converter generates a cool 80W of power. The PW-80 provides plenty of power for your CPU and peripherals. Designed to meet the most demanding fanless power operations the PW-80 dc-dc converter delivers cool power for ultra compact, light designs.
100% Silent. The PW-80 mini PSU is a 100% silent dc to dc solution. No fans, no noise, just power for your silent and small PC.
Micro Power Supply
- 80 Watt DC-DC power supply unit (PSU)
- ATX standard compliant
- 11-30V operation
- 100% silent, small footprint
- Plugs directly into the motherboard ATX connector
PRODUCTBESCHRIJVING
NOT RECOMMENDED FOR NEW DESIGNS. THIS PRODUCT WILL BE EOL'd on Q1 2006.
REPLACEMENT OR EQUIVALENT PART: M1-ATX
Compact design, less cables. The PW-80 is the only cableless mini-atx wide input dc to dc power supply for the VIA platform. Compatible with an entire range of mini-itx motherboards such as VIA EPIA-M provides cool, silent power for your small mini-itx board from a single 11V-30V power source. Recommended for 12 and 14V battery applications.
Reduce space. Eliminate 20 unnecessary wires by connecting directly into the motherboard ATX connector. The PW80 11-30V dc-dc converter was designed from ground up to fit VIA's mini-itx form factor, allowing case designers to save space while not compromising power requirements.
Cool power. Operating from 11V-30V, the PW-80 dc-dc quiet power supply converter generates a cool 80W of power. The PW-80 provides plenty of power for your CPU and peripherals. Designed to meet the most demanding fanless power operations the PW-80 dc-dc converter delivers cool power for ultra compact, light designs.
100% Silent. The PW-80 mini PSU is a 100% silent dc to dc solution. No fans, no noise, just power for your silent and small PC.